Manufacturer of Industrial Wheels
Terms
Phenolic resin combined with fiber particles and molded under extreme pressure and temperature creates a very durable, versatile and economical wheel. Phenolic resin wheels are very hard and consequently roll well on relatively smooth surfaces. They are resistant to water, most solvents, oils, acids and chemicals. Operating temperature range is -50°F to 260°F intermittently up to 300°F. Specify bearing type.
  • High Temperature
    Most sizes are available made from phenolic resin designed to withstand temperatures up to 475°F. The compounding that is required to manufacture these wheels makes them more brittle than standard and consequently more likely to chip on rough surfaces.
  • Special Bearings
    Wheels can be equipped with sealed precision grade ball bearings and T-bushings (most sizes) for maximum rollability. Tapered roller bearings can also be provided for increased capacity and applications that require a more durable bearing set-up.
  • V-Groove
    Most sizes can accomodate a V-groove for use on an inverted angle-iron track. Capacities are reduced by 40%. Other modified tread faces are available. Consult factory.
  • Polyurethane on Phenolic
    Special manufacturing techniques allow us to securely bond a polyurethane tread to a phenolic center. Many potential applications for this extremely tough and economical combination exist. Please consult the factory for available sizes.
  • Laminated Tread
    Available with a laminated tread - a phenolic impregnated fiber wrapping over the standard center. This lamination provides greater resistance to chipping and fraying. Additionally, shock, impact resistance and capacity are increased.
Unit of Measure

Specifications

Diameter

N/A 3 1/4

Face Size

N/A 2

Bore Size

N/A 1 3/16

Available Roller Bearings

N/A 5/8 3/4

Capacity

N/A 700 lbs.

Shipping Weight

N/A 1 1/4

Features

N/A

  • Grease Fittings
    All wheels with 115/16” bore or larger come equipped with grease zerk standard.
  • Neoprene Lip Seals
    Washer seals are available for all sizes.
  • Non-Sparking/Non-Marking
    Will not mark floors or spark. Not recommended for resilient tile floors.
  • Straight Sided
    Designed with no recesses that dirt, grease and other debris can “pack in.” This is helpful in maintaining a sterile or clean environment. This also adds additional rigidity and strength. Available in limited sizes.

Options Available

N/A

  • V-grooves (some sizes)
  • Tread face profiles
  • High heat resistance
  • Laminated treads
  • Straight sided (some sizes)
  • Washer seals
  • Reduced hub length
  • Special bore sizes
  • Ball bearings
  • Tapered roller bearings

Warranty

N/A Trew Industrial Wheels, Inc. warrants all wheels to be free from defective workmanship and materials for a period of one year from date shipped. This warranty is conditional upon wheels being used in the environment and application for which they were sold. All capacities are based on intermittent use at speeds not in excess of 3 mph. We cannot be responsible for misuse, accidents, or unusual conditions not reported to us at the time of purchase. Trew wheels are not intended for human conveyances or amusement rides. In all cases, our liability shall be limited to the factory invoice cost of the products.

Design/Specification Changes

N/A Trew Industrial Wheels, Inc. reserves the right to change the design and/or modify the specifications of items in this catalog without notice. If a particular dimension or specification is critical, it should be verified at the time the order is placed.