Cast iron or semi-steel wheels combine strength and durability with economy. They have very low rolling resistance and can withstand abusive conditions and high loads. Trew semi-steel wheels are “Made in the USA” from Class 30 cast iron with 30,000 psi tensile strength. A small amount of scrap steel found in all cast iron is the origin of the name - semi-steel wheels. Denotes ball bearings with two-part T-bushing which adds 1/4” to overall hub length
Unit of Measure

Specifications

Diameter

N/A 6

Face Size

N/A 2

Bore Size

N/A 1.378

Hub Length

N/A 2 3/16

Axle Size

N/A 1/2

Bearing Type

N/A Ball

Capacity

N/A 1200 lbs.

Shipping Weight

N/A 6

Features

N/A

  • Class 30 Gray Iron
    Cast from Class 30 cast iron, these solid web metal wheels are designed to hold up under severe conditions. Trew Cast Semi-Steel Wheels offer high load capacity and wide temperature range. Extreme shock can damage any cast iron.
  • Tapered and Ball Bearings
    All sizes except 2 1/2” O.D. come equipped with grease fittings. Precision tapered and ball bearings are available with most sizes.
  • Flat Face/Crown Tread
    Wheels are machined with flat face. Crown face is available as an option.
  • Additional Sizes
    Additional sizes are available. Please consult the factory.
  • Made In U.S.A
    All trew wheels are made in the U.S.A.
  • Keyways
    Keyways and special bores available in most sizes.
  • Easy Rolling
    Easy rolling on smooth floors. However, they may cause excessive floor wear and/or noise.
  • High Temperature
    Cast iron wheels will withstand temperature extremes.

Options Available

N/A

  • Crown face
  • Special widths or hub lengths
  • Roller bearing seals
  • Special bore
  • Keyways/set screws

Warranty

N/A Trew Industrial Wheels, Inc. warrants all wheels to be free from defective workmanship and materials for a period of one year from date shipped. This warranty is conditional upon wheels being used in the environment and application for which they were sold. All capacities are based on intermittent use at speeds not in excess of 3 mph. We cannot be responsible for misuse, accidents, or unusual conditions not reported to us at the time of purchase. Trew wheels are not intended for human conveyances or amusement rides. In all cases, our liability shall be limited to the factory invoice cost of the products.

Design/Specification Changes

N/A Trew Industrial Wheels, Inc. reserves the right to change the design and/or modify the specifications of items in this catalog without notice. If a particular dimension or specification is critical, it should be verified at the time the order is placed.